Integrating STOBER Drives Hollow Bore Motors into Your Kinetix System

STOBER’s EZHD, EZHP, and EZM are all Rockwell Enabled. They work with the Kinetix 6500 Version 23 and up as well as the Kinetix 5700 Version 2 and up. They utilize Heidenhein Endat 2.2 digital single turn absolute positioning.

To enable the motor, choose the correct STOBER motor from the drop-down menu. On the feedback tab, choose alignment = motor offset. This will trigger the drive to use the commutation offset that is stored in the nameplate.

If you wish to test the motor, you can highlight the motion group you are using and select motion direct commands. Select the command you want to use and click execute to start the command.

If you need any assistance, please contact STOBER at 606-759-5090.

Why use a STOBER EZ motor?

ez

STOBER released its next generation EZ hollow bore motor series. The hollow bore is ideal for high speed applications where air or electrical wires need to pass through the motor. The advantages of this product line are the shorter length for more compact solutions, high torque density, optional braking, and a hollow bore. It also offers flexibility with compact size and mounting, dual shafted output, increased accuracy and speed, and stronger bearings.

What’s the difference between an EZHD, EZHP, and EZM? EZHD is a hollow bore motor with a direct drive. There is no gearing in this unit. The EZHP is a hollow bore motor with integrated gearing. The EZM is a hollow bore motor that can drive a nut from the ball screw.

For more information, visit http://www.stober.com/products/servo_motor_page/ 

Save Space with a Geared motor

gearmotor

Do you want to save space in your application? This can be done with a STOBER geared motor. By utilizing an integral unit, you can save over 20% in length by eliminating motor adapter plates and coupling. Not only can you save space but you can also take advantage of less inertia and a higher torque density.

gearmotorMA

Visit http://www.stober.com/products/servo_motor_page/

 

STOBER Expands Rockwell Enabled Product Offerings

enabledDo you need a motor that works with Kinetix 5700 and 6500? STOBER has an extensive offering of Rockwell enabled servo motors. You can size them in your design with Rockwell’s online sizing and selection tool, Motion Analyzer!

STOBER’s hollow bore motor is an ideal solution for passing cables and pipes through the motor. It is available as a direct drive or with gearing ratios of 3, 9, or 27:1. The ball screw servo motor is designed to directly drive a spindle nut. It is compact and is designed for universal mounting to the spindles.

In addition to stand alone motors, STOBER offers geared motors. Our gearboxes mount directly to our servo motors, eliminating the need for a motor coupling, adapter, coupling housing, and other additional components. Visit our website to learn more!